Model | AS-1 | AS-2 | AS-4 | AS-6 | AS-9 |
Capacity (in kg) | 1 | 2 | 4 | 6 | 9 |
Anti-Corrosive Inhibitor | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating |
Type of Extinguishing Media | Dry Powder IS 14308 | Dry Powder IS 14308 | Dry Powder IS 14308 | Dry Powder IS 14308 | Dry Powder IS 14308 |
Expellant | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas |
Minimum Effective Discharge (%) | 85 | 85 | 85 | 85 | 85 |
Minimum Jet Length (in metres) | More than 2 | More than 2 | More than 2 | More than 2 | More than 2 |
Discharge Time (in seconds) | More than 8 | More than 8 | More than 13 | More than 13 | More than 13 |
Hydraulic Test Pressure (in kgf/sq. cm) | 35 | 35 | 35 | 35 | 35 |
Operating Position | Upright | Upright | Upright | Upright | Upright |
Operating Temperature Range (in Celsius) | (-)30 to (+)60 | (-)30 to (+)60 | (-)30 to (+)60 | (-)30 to (+)60 | (-)30 to (+)60 |
Operating Valve | Squeeze Grip with Nozzle | Squeeze Grip with Nozzle | Squeeze Grip with Discharge Hose | Squeeze Grip with Discharge Hose | Squeeze Grip with Discharge Hose |
Fire Rating | 1A & 21B | 1A & 21B | 2A & 55B | 3A & 89B | 4A & 144B |
Model | ASSP / ASTM - 25 | ASTM - 50 | ASTM - 75 |
Capacity (in kg) | 25 Kg | 50 Kg | 75 Kg |
---|---|---|---|
IS Specification | IS:16018 | IS:16018 | IS:16018 |
Throw of Jet Maintain | 8 Sec | 16 Sec | 16 Sec |
Temperature Range | -30°C to +55°C | -30°C to +55°C | -30°C to +55°C |
At Least 90% of Contests | 25-30 Sec | 40-50 Sec | 50-60 Sec |
Range of Jet | 6 Mtrs. | 8 Mtrs. | 10 Mtrs. |
Fire Rating | 20A & 233B | 10A & 233B | 20A & 233B |
Working Pressure | 15Kgf/cm² | 15Kgf/cm² | 15Kgf/cm² |
Hydro Pressure | 35Kgf/cm² | 35Kgf/cm² | 35Kgf/cm² |
Bursting Pressure | 55Kgf/cm² | 55Kgf/cm² | 55Kgf/cm² |
Model | AS Co2- 4.5 | AS Co2 - 2 |
Capacity (in kg) | 4.5 | 2 |
---|---|---|
Filling Ratio | 0.667 | 0.667 |
Type of Extinguishing Media | Co2 Gas Conforming to IS:15222 | Co2 Gas Conforming to IS:15222 |
Expellant | Self | Self |
Minimum Effective Discharge (%) | 95 | 95 |
Minimum Throw (in metres) | More Than 2 | More Than 1 |
Minimum Discharge Time (in seconds) | More than 8 | More than 8 |
Operating Position | Upright | Upright |
Operating Temperature Range (in Celsius) | (-)30 to (+)60 | (-)30 to (+)60 |
Operating Valve (IS 3224) | Squeeze Grip / Wheel Type | Squeeze Grip / Wheel Type |
Fire Rating | 55B | 21B |
Model | AS Co2 - 6.5 | AS Co2 - 9 | AS Co2 - 22.5 |
Capacity (in kg) | 6.5 | 9 | 22.5 |
---|---|---|---|
Filling Ratio | 0.667 | 0.667 | 0.667 |
Type of Extinguishing Media | Co2 Gas Conforming to IS:15222 | Co2 Gas Conforming to IS:15222 | Co2 Gas Conforming to IS:15222 |
Expellant | Self | Self | Self |
Minimum Effective Discharge (%) | 95 | 95 | 95 |
Minimum Throw (in metres) | More than 2 | More than 2 | More than 2 |
Minimum Discharge Time (in seconds) | More than 8 | More than 8 | More than 8 |
Operating Position | Upright | Upright | Upright |
Operating Temperature Range (in Celsius) | (-)30 to (+)55 | (-)30 to (+)55 | (-)20 to (+)55 |
Operating Valve (IS 3224) | Squeeze Grip/ Wheel Type | Squeeze Grip/ Wheel Type | Squeeze Grip/ Wheel Type |
Fire Rating | 55B | 55B | 89B |
Model | ASC - 2 | ASC - 4 |
Capacity (in kg) | 2 | 4 |
---|---|---|
Anti-Corrosive Inhibitor | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating |
Type of Extinguishing Media | HCFC 123 | HCFC 123 |
Expellant | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas |
Minimum Effective Discharge (%) | 95 | 95 |
Minimum Jet Length (in metres) | More than 2 | More than 2 |
Discharge Time (in seconds) | More than 8 | More than 8 |
Hydraulic Test Pressure (in kgf/sq. cm) | 35 | 35 |
Operating Position | Upright | Upright |
Operating Temperature Range (in Celsius) | (-30 + 60) | (-30 + 60) |
Operating Valve | Squeeze Grip with Nozzle | Squeeze Grip with Discharge Hose |
Fire Rating | 1A & 21B | 1A & 34B |
Model | ASD - 4 | ASD - 6 |
Capacity | 4 kg | 6 kg |
---|---|---|
HydraulicTest Pressure | 35 kgf/cm² | 35 kgf/cm² |
Service Pressure | 15 kgf/cm² | 15 kgf/cm² |
Type of Extinguisher Media | Chloride based Dry Powder | Chloride based Dry Powder |
Operating Position | Upright | Upright |
Discharge Time | More than 18 Second | More than 18 Second |
Minimum Effective Discharge | 85% | 85% |
Minimum Jet Lenght | More Than 0.5m | More Than 0.5m |
Class | D Class of Fires Only | D Class of Fires Only |
Expellant | Pressurized with N2 gas | Pressurized with N2 gas |
Operating Valve | Squeeze Grip Type | Squeeze Grip Type |
Nozzle | Low Pressure Nozzle | Low Pressure Nozzle |
Model | Electric Operated Siren | Hand Operated Siren |
Alram Range | 1/2 Mile to 5 km | 1/2 Mile to 1.5 km |
---|---|---|
Operating Voltage | 240 V / 440 V | ------ |
16x2 Dot Matrix LCD Display. | Power I/P | : AC-230 V, 50 HZ + 5% |
Standby backup with built in Charging. | : DC - 24 V | |
---|---|---|
Fire / Fault status in unambiguous colored LED indication. | Cabinet | : Powder Coated Steel |
Housing | : CRCA Sheet | |
Switch Mode Power Supply. | Power Consumption | : 30 Watt |
Tactile Keypad for easy panel operation. | Weight (Packed) | : Off White |
System ON indication. | Zone wise output Supply | : 24 V DC |
Main, Standby status indication. | Hooter output Supply | : 24 V DC |
Low Battery visual warning. | ||
Lamp Test facility. | ||
Zone wise one man Walk Test Facility. | ||
Zone wise Isolation facility with Loop voltage cut off. | ||
Compatible to all type of Conventional Detectors. | ||
Common Hooter Facility. |
Type of Material | Gun Metal | Stainless Steel |
Body | LTB - IS : 318 | Stainless Steel:- IS 3444 |
---|---|---|
Rubber Washer | IS : 937 (Type-A) | IS : 937 (Type-A) |
Spring | Phosphorus Wire:- IS 7608 | Stainless Steel:- IS 6528 |
Size | 63 mm | 63 mm |
Rate of Rise cum Fix Temperature type | Operating Voltage | DC (10.830) V |
Dual LED for 360 degree visibility | Frequency | 3-5 Seconds |
---|---|---|
2 wire based detector visibility | Heat Sensitivity | 135 F/ROR |
Advance algorithms provides advanced | Reset Voltage | Less than 1 volt |
Detection discrimination | Reset time | Less than 1 sec |
Easy installation | Alarm indication | 2 continuous emitting red LEDs |
Low maintenance | Start up current | 100 UA |
High immunity against unwanted alarms | Alarm current (Max) | 50 mA |
Stable heat chamber No adjustment or replacement required | Stand by current | 40 UA |
Dimension | Dia 100mm, ht 46mm. |
Type of Material | Gun Metal | Stainless Steel |
Body Bonnet Assembly | LTB - IS : 318 | Stainless Steel:- IS 3444 |
---|---|---|
Valve Spindle | Brass Rod - IS : 319/320 | Stainless Steel:- IS 66003 |
Cast Iron Wheel | IS - 210 | IS - 210 |
Rubber Washer | IS : 937 (Type-A) | IS : 937 (Type-A) |
Spring | Phosphorus Wire:- IS 7608 | Stainless Steel:- IS 6528 |
Gland Packing | Asbestos Thread:- IS:4687 (Type-3) | Asbestos Thread:- IS: 4687 (Type-3) |
Extinguishing Agent | ABC Dry Powder | Clean Agent | ||
Capacity (in kg) | 5 | 10 | 5 | 10 |
---|---|---|---|---|
Can Construction | Mild Steel | Mild Steel | Mild Steel | Mild Steel |
Automatic Activation Temperature (in Celsius) | 68 | 68 | 68 | 68 |
Height (in mm) | 250 | 260 | 250 | 260 |
DIA (in mm) | 240 | 250 | 240 | 250 |
Gross Weight (in kg) | 8 | 14 | 8 | 14 |
Test Pressure (in kg/sq. cm) | 35 | 35 | 35 | 35 |
Super Charge Pressure (in kg/sq. cm) | 15 | 15 | 15 | 15 |
Discharge Time (in Seconds) | 8 | 10 | 8 | 10 |
Area Coverage | 4 sq. m | 6 sq. m | 4 sq. m | 6 sq. m |
Type of Material | Gun Metal | Stainless Steel |
Body | LTB - IS : 318 | Stainless Steel:- IS 3444 |
---|---|---|
Size | 63 mm | 63 mm |
Size: | All Size of Boxes / Frames Fabricated as pr client’s Specification. |
Material: | Mild Steel Sheet, Stainless Steel Sheet Aluminium Sheet. |
Type: | Single door / Double door type with locking arrangement front glass & Key |
Model | ASW - 9 | ASF - 9 |
Capacity (in Ltr.) | 9 | 9 |
Anti-Corrosive Inhibitor | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating |
Type of Extinguishing Media | Soft Water | Soft Water / AFFF Foam IS 4989 |
Expellant | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas |
Minimum Effective Discharge (%) | 95 | 95 |
Minimum Jet Length (in metres) | More than 2 | More than 2 |
Discharge Time (in seconds) | More than 13 | More than 13 |
Hydraulic Test Pressure (in kgf/sq. cm) | 35 | 35 |
Operating Position | Upright | Upright |
Operating Temperature Range (in Celsius) | (+)5 to (+)60 | (+)5 to (+)60 |
Operating Valve | Squeeze Grip with Discharge Hose | Squeeze Grip with Discharge Hose |
Fire Rating | 3A | 4A & 144B |
Model | ASW-45 | ASMF-45 |
Capacity (in Ltr.) | 45 | 45 |
Anti-Corrosive Inhibitor | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating |
Type of Extinguishing Media | Soft Water | Soft Water / AFFF Foam IS 4989 |
Expellant | Pressurized with Nitrogen gas | Pressurized with Nitrogen gas |
Minimum Effective Discharge (%) | 95 | 95 |
Minimum Jet Length (in metres) | More than 2 Mtr. | More than 2 Mtr. |
Discharge Time (in seconds) | More than 13 Sec. | More than 13 Sec. |
Hydraulic Test Pressure (in kgf/sq. cm) | 35 | 35 |
Operating Position | Upright | Upright |
Operating Temperature Range (in Celsius) | (+)5 to (+)55 | (+)5 to (+)55 |
Operating Valve | Squeeze Grip with Discharge Hose | Squeeze Grip with Discharge Hose |
Fire Rating | 10A | 10A & 233B |
Model | AS WC - 2 | AS WC - 4 | AS WC - 6 |
Capacity (in Ltr.) | 2 | 4 | 6 |
Filling Ratio | 0.667 | 0.667 | 0.667 |
Type of Extinguishing Media | Wet Chemical | Wet Chemical | Wet Chemical |
Expellant | Nitrogen | Nitrogen | Nitrogen |
Min. Effec. Discharge (%) | 95 | 95 | 95 |
Min. Throw (in mtr.) | 1 | 2 | 2 |
Min. Discharge Time (in sec) | More than 8 | More than 8 | More than 8 |
Operating Temp. Range (in Celsius) | (+)5 to (+)60 | (+)5 to (+)60 | (+)5 to (+)60 |
Operating Valve | squeeze Grip | squeeze Grip | squeeze Grip |
Hydraulic Test | 35 | 35 | 35 |